Jsoprtvr 3 Pack Replacement for Ring Battery Review: finally a Ring charger that actually tells you what’s going on

I’ve been using Ring stuff for a while now (doorbell plus two battery cams), and the one thing that always annoyed me was the battery situation. One chunky battery, a vague little LED on the official charger, and a lot of guessing about when things would be ready. So I picked up this Jsoprtvr 3-pack replacement kit with the LED display charger to see if it could simplify the rotation.

I’ve had it running for a couple of weeks in the hallway, constantly charging and swapping batteries between a Ring Video Doorbell 3 and a Stick Up Cam. I’m not treating it gently either: high motion sensitivity, lots of alerts, and the usual British weather on the devices. The idea here is simple: three spare batteries and a dock that shows exact percentages so you’re never caught with a dead doorbell.

Right away, the thing that stood out was the LED percentage display. Compared to the official Ring charger’s single light that just blinks forever, having a number from 0 to 100% is just more practical. I know exactly when it’s worth swapping a battery, instead of playing the guessing game. That already made the kit feel like less of a gimmick and more like something I’d actually keep plugged in.

It’s not perfect though. The pack isn’t super cheap, and these are third-party batteries from a brand I’d never heard of, made in China like most of this stuff. So I went in expecting “decent but nothing special.” After using it daily, I’d say it’s pretty solid overall, with a couple of quirks you should know about before dropping your money on it.

Price-wise, this kit sits in a slightly awkward spot. You’re getting three batteries plus a multi-slot charger with LED display. If you compare that to buying official Ring batteries at full Amazon price (around £25 each) plus the Ring charger, this looks like a decent deal. But if you shop around, you can sometimes find genuine Ring batteries on offer for under £15, and there are other third-party batteries cheaper than this set. So the value really depends on how often you see discounts and how much you care about the LED dock.

For roughly £50 (around the current price mentioned in one of the reviews), you’re paying about £16–17 per battery if you consider the dock as a small bonus. That’s not bad, but it’s not a crazy bargain either. Where this kit earns its keep for me is the convenience: three matched batteries and a single dock that handles them all, with clear percentages. If you’ve got multiple Ring devices and you’re tired of juggling one charger and guessing charge levels, that convenience has real value.

If you only have one Ring doorbell and you just want a single spare battery, this kit is probably overkill. You’d be better off with one OEM battery or a cheaper single third-party one. But if you’re running a doorbell plus one or two cams, suddenly three batteries in rotation makes sense: one in each device and one always on charge, or two in devices and one spare ready to swap.

Overall, I’d say value is good but not outstanding. You’re paying a fair price for a complete setup that actually works well, but if the price creeps much above £50, I’d start looking at alternatives. If it drops closer to £40, then it becomes an easy recommendation for anyone with multiple Ring devices who wants to simplify battery management.

Design-wise, the Jsoprtvr kit is very no-nonsense. The dock is a chunky black plastic block that’s roughly the size of a couple of stacked smartphones. It’s not pretty, but I don’t need it to be. Mine lives on a shelf near the router where nobody really looks at it. The important part is the top: three clear battery bays with the contact points and three little LED number windows at the front. Each bay has just enough guidance that you can drop the battery in without fiddling or checking orientation every time.

The built-in USB-A cable is handy but also a bit of a mixed bag. On one side, it means you don’t need to hunt for a cable; just plug it into any USB port, and you’re good. On the other side, the cable isn’t very long, so you’re slightly limited on where you can place the dock unless you run an extension or a longer USB adapter. There is a micro-USB input on the side though, which gives you a backup option if the built-in cable ever fails or doesn’t reach.

The LED percentage displays are the best part of the design. They’re bright enough to read easily in daylight but not so bright that they light up the whole room at night. Each slot has its own number, and they update as the battery charges. It’s much clearer than the usual red/green light approach. You can see at a glance which battery is nearly ready and which one still has a way to go. In daily life, that’s more useful than I expected.

In terms of footprint and overall look, it’s just a black plastic dock with some numbers on it. It feels a bit “budget gadget” rather than premium, but it gets the job done. No sharp edges, no weird noises, nothing overheating on my side. For the price bracket and the purpose, the design is fine: practical, not pretty. I’d give it a solid score for usability, even if it won’t win any design awards.

The big question: are these batteries actually decent, or are they the kind that work for a month and then fall off a cliff? So far, after a few charge cycles, they’re holding up well. On my Ring Doorbell 3, one Jsoprtvr battery lasted just under 5 weeks from 100% down to the “time to charge” warning in the app, with motion alerts on and a moderate amount of doorbell presses. That’s basically the same as my official Ring battery, maybe a couple of days difference at most. On the Stick Up Cam, I got just over 3 weeks with pretty active motion recording.

In terms of how they discharge, they don’t drop suddenly. The percentage in the Ring app goes down in a fairly steady way. I didn’t notice any weird jumps like “stuck at 50% then suddenly dead,” which sometimes happens with cheap no-name batteries. When the dock says 100%, the Ring app usually shows 98–100%, so the calibration is close enough that you don’t feel tricked. That’s reassuring, especially when you’re trusting this stuff for home security.

Heat-wise, during charging the batteries get warm but not hot. The dock itself stays reasonably cool. I left them charging overnight several times and checked them in the morning: no swelling, no strange smells, no odd behaviour. The listing mentions six-way protection (overcharge, overdischarge, short circuit, overheat, etc.). Obviously, I can’t fully verify all of that, but at least in normal use I haven’t seen any safety red flags.

Long-term durability is harder to judge after only a few weeks, but nothing so far hints at quick degradation. If they keep matching the OEM battery life for the next six months, I’d call that a win. For now, I’d say battery performance is pretty solid, especially considering you get three of them. Just don’t expect them to be some miracle upgrade over the official Ring packs; they’re more “good equivalent” than “massive improvement.”

On the build quality side, everything here feels decent but clearly budget. The dock is lightweight plastic, and if you press on it, there’s a tiny bit of flex, but nothing worrying. The battery slots are snug, and after dozens of insert/remove cycles, I’m not seeing loose contacts or wobble. The batteries still click into the Ring devices with the same firmness they had on day one, which is a good sign for the connectors.

The LED screens haven’t flickered or dimmed yet. I’ve had them running pretty much constantly since I got the unit, with at least one battery charging at all times. The numbers are still bright and readable. The only thing I’m slightly cautious about is the built-in USB cable. Fixed cables tend to be the weak point on this kind of product if you bend them too much. I’ve tried to keep mine in a gentle curve and not yank it around. There’s the backup micro-USB input though, so even if the built-in cable dies, the dock won’t be useless.

The plastic on the batteries themselves resists scratches reasonably well. I’ve dropped one from about waist height onto a hard floor by accident; it picked up a small cosmetic scuff but worked fine afterward. No rattling inside, no looseness. They feel similar in toughness to the original Ring battery packs. I wouldn’t throw them around, but for normal home use, they seem up to the job.

Obviously, real durability only shows up after 6–12 months, but based on the first weeks of swapping, charging, and a few clumsy drops, I’d say build and durability are good enough for everyday use. It doesn’t feel premium, but also not like something that’s going to fall apart in a month. For the price and the category, that’s acceptable to me.

Let’s talk about how this thing actually performs, because that’s what matters. I’ve been rotating these three Jsoprtvr batteries between a Ring Video Doorbell 3 and a Stick Up Cam 3rd gen. My usual pattern with the official Ring battery is roughly 4–5 weeks in the doorbell and 3–4 weeks in the outdoor cam, with motion detection pretty active. With these replacements, I’m seeing very similar runtimes, maybe slightly better in the first couple of cycles but nothing dramatic. So in practice, they behave close enough to OEM that I stopped thinking about which battery is in which device.

Charging speed is decent. From around 10–15% to 100% on a single battery, using a 5V/2A USB plug, it took about 5–6 hours in my tests. Charging two at the same time stretched that a bit, closer to 7 hours from low to full. With three in the dock, they all reached 100% overnight without issue, but you can tell the current is shared. For most people, that’s fine: you stick the empties in before bed and pick them up in the morning.

The LED percentage readout is genuinely useful. I didn’t realise how annoying the simple LED on the official Ring charger was until I had this. Being able to see “this one is at 78%, that one at 40%” helps you decide if it’s worth swapping a battery yet or waiting another hour. I’ve had no glitchy readings so far; when the dock said 100%, the Ring app also reported high 90s to 100% once installed, so the calibration seems close enough.

The only time I had a slight worry was with one battery that was totally drained. When I first dropped it in, the display stayed blank for about 30–40 seconds. That matches what the manual and listing say: if it’s completely drained, it needs a short “buffer” period. After that, the number popped up at 1% and started climbing. So yes, there’s a small quirk there, but once you know it, it’s not a big deal. Overall, performance is solid, nothing fancy but effective, and perfectly fine for daily Ring use.

Out of the box, you get three batteries and one charging station with a built-in USB-A cable. No wall adapter, just the USB cable coming straight out of the dock, plus a micro-USB input if you want to use your own cable. So you’ll need either a spare USB plug or a powered USB port somewhere. For me, I just plugged it into a multi-USB charger I already had by the router.

The batteries themselves are the same general size and shape as the official Ring ones. They slide into my Ring Doorbell 3 and Stick Up Cam (3rd gen) with no weird play, no forcing, no wobble. They click in like the originals. Voltage is listed as 3.65V, 6040mAh, which on paper is slightly higher capacity than the standard Ring batteries that sit around 5200–6000mAh depending on version. They don’t feel cheap in the hand, just standard plastic blocks, nothing fancy.

The charging dock has three slots on top, each with its own little numeric LED readout. When you drop a battery in, it shows the charge percentage for that slot. You can charge up to three at once, but note that only two ports are electrically active at a time via the 5V/2A input, so the charging speed depends on what you plug it into. In practice, with my 2A USB plug, it charged two batteries at full speed and the third a bit slower, but all three did eventually reach 100% overnight.

Overall, the presentation is pretty straightforward: no fancy accessories, no pouch, no extra cables. Just dock, batteries, attached USB lead, and a small manual that explains the “if it’s totally dead, let it sit a minute before the display lights up” quirk. Nothing flashy, but it matches the product description and feels like the right bundle for someone running multiple Ring devices.