JYJZPB 7200mAh Ring Battery Review: Longer life for Ring cameras without paying Ring prices

I bought this JYJZPB 7200mAh battery kit because I was getting tired of Ring’s own batteries running low at the worst time and paying full price for extras. I’ve got a Ring Video Doorbell 3 and a Stick Up Cam 3rd gen, both on battery, and with a busy street in front of the house they chew through power pretty fast. I wanted two spare batteries and a simple charger so I could just swap and forget about it. This pack seemed like a decent middle ground between price and capacity.

I’ve been using the kit for a few weeks now, rotating the two JYJZPB batteries with my original Ring battery. I charged them fully on the included dual charging base, then threw one into the doorbell and one into the Stick Up Cam to see how they compared. I didn’t change any motion or video settings, so it’s a pretty fair side‑by‑side test. I mainly cared about three things: real battery life, how hot they get, and whether the Ring app complains about them.

In day‑to‑day use, the first thing I noticed is that Ring recognizes them just fine. No weird error messages, no random disconnects. The battery level shows up like the original. That sounds basic, but with some cheap third‑party batteries you can get odd behavior. Here, it just works. I also watched for any random reboots or missed motion alerts and didn’t see anything out of the ordinary. The cameras behaved like before.

Overall, my first impression is that this kit is pretty solid for the price. It’s not perfect, and I don’t think the 7200mAh claim translates 1:1 to double life in real use, but you do get decent extra runtime and the convenience of a dual charger. If you’re expecting miracles, you’ll be disappointed; if you just want more batteries that basically match the originals without paying Ring’s markup, this is more or less what you get.

On the value side, this kit makes sense if you already have at least one Ring device and you’re tired of juggling a single battery. You get two batteries plus a dual charger for about what Ring charges for one official battery (depending on current pricing and promos). So just in terms of raw hardware for the money, it’s clearly more attractive. You’re basically trading the Ring brand name and maybe a bit of long‑term peace of mind for extra capacity and convenience right now.

In daily use, the fact that performance is so close to the original Ring battery is what makes the value solid. If these drained faster or caused errors, the lower price wouldn’t matter. But since they work normally in the app, last about as long or a bit longer, and don’t overheat, the lower cost actually translates into real benefit. For a household with multiple Ring cameras or doorbells, having three batteries in total (two JYJZPB + one Ring) lets you run everything without ever having a device offline waiting for a charge.

Of course, there are trade‑offs. You don’t get Ring’s official support for these batteries, and if something goes wrong, Ring will probably tell you to use their own accessories. The included charger is basic, uses micro‑USB, and doesn’t look premium. And we don’t know yet how these will behave after a year or two of heavy cycling. So if you’re extremely risk‑averse or you’re putting this on a critical security setup where downtime is a big issue, you might still prefer to stick with official parts.

But if you’re like me and just want good value for money without paying the brand tax, this kit makes sense. You spend less, you get more batteries, and you add a dual charger into the mix. It’s not perfect and it’s not luxury gear, but for the price point, it does what it needs to do and gives you a bit more flexibility with your Ring system.

Design‑wise, these JYJZPB batteries are pretty much Ring clones. Same shape, same latch system, same contact position. The plastic is a bit more matte and feels slightly cheaper in the hand compared to the official Ring battery, but not in a way that worries me. The latch clicks firmly, and I didn’t have any feeling that it might break or bend easily. I did a few swaps back and forth to see if anything loosened up, and the fit stayed snug in both my Doorbell 3 and Stick Up Cam.

The dual charger is compact and light. It’s not the kind of thing you’d put on display, but it’s small enough to sit behind a TV, on a shelf, or near your router without being in the way. The plastic is basic and a bit hollow‑sounding if you tap it, but the important bit is that the batteries sit securely in the slots and the contacts line up. I tried slightly wiggling the batteries while charging, and the LEDs didn’t flicker, so the connection seems solid. The micro‑USB port feels standard; not loose, not stiff.

One thing worth noting: no fancy cooling or rubber pads under the charger. It’s just hard plastic. During charging, the batteries get warm but not hot enough to worry me. I put my hand on them mid‑charge and they were warm to the touch, similar to the original Ring battery when charging. If you’re paranoid about heat, don’t stick it on a pile of papers or under a blanket, but for normal desk use it’s fine.

Overall, the design is exactly what you’d expect from a third‑party accessory: copy the original shape, keep costs down, and focus on compatibility. It’s not pretty, but it’s also not flimsy. For something you’ll mostly hide behind a camera or in a charger, I don’t really need more than that. If you’re hoping for some kind of upgraded, more premium feel than the official Ring battery, that’s not what this is. It’s basically a functional clone that gets the mechanical details right.

Let’s talk battery in a bit more detail, because that’s the whole point of buying this kit. The brand advertises 7200mAh at 3.65V, which sounds big on paper. In reality, what matters is how long your camera stays online between charges and how annoying the charging process is. On my Doorbell 3, I went from taking the battery out roughly every 3–4 weeks with the original pack, to something like 4 weeks, occasionally a bit more, with the JYJZPB. It’s not a huge leap, but over a year, it does mean fewer trips to the door to swap batteries.

Charging time is pretty standard. Using a regular 5V USB wall plug and the included dual charger, I was seeing around 6–7 hours for a full charge from almost empty. It’s not fast, but it’s also not painfully slow. Since there are two slots, I just plug them in overnight and don’t think about it. I did try charging one battery through the official Ring plug‑in charger for comparison, and the time felt roughly similar, so you’re not losing anything major there. The charger only supports micro‑USB, which is a bit dated; USB‑C would have been nicer, but not a dealbreaker.

About heat: during charging, the batteries get warm but not to the point where you can’t touch them. I left them on a wooden shelf and checked a few times; the plastic was warm but not soft or warped. The charger body also stayed relatively cool. In use inside the cameras, I didn’t notice any unusual heat either, even during longer live views. So from a safety perspective, nothing weird stood out. They also mention CE, FCC, RoHS certifications and built‑in protection against over‑charge, over‑discharge, etc. I obviously can’t verify all that myself, but at least in daily use, behavior seems normal and stable.

Overall, I’d rate the battery side as solid: good runtime, predictable charging, no scary heat spikes. The capacity number on the box sounds better than what you actually feel in real life, but I’d rather have a slightly inflated spec than a battery that dies in a week. For someone with multiple Ring devices, having two of these in rotation with the original is enough to keep everything running without much planning. Just don’t expect miracles from the mAh figure alone.

Durability is always tricky to judge after only a few weeks, but I can at least share how things look and feel so far. I’ve done several full charge/discharge cycles on both batteries, swapping them between my Doorbell 3 and Stick Up Cam. The plastic housings still look fine: no cracks, no weird discoloration, and the latch mechanisms still click in and out cleanly. The contacts haven’t bent or tarnished, and they still slide into the cameras smoothly without needing extra force.

The charger has also held up. The spring contacts in the bays still press properly against the battery terminals, and the LEDs still switch correctly from red to green. I’ve unplugged and replugged the micro‑USB cable a bunch of times, and the port doesn’t feel loose. The charger is definitely on the cheap‑feeling side, but it hasn’t shown any real weakness yet. It’s the kind of thing you set up once and leave alone anyway, so as long as it keeps charging, I don’t really care that it’s not heavy or premium.

One thing I watched closely is whether the batteries start losing capacity quickly, which is a common issue with low‑end third‑party packs. So far, after a few cycles, I’m not seeing obvious degradation. The doorbell and camera are still lasting roughly the same amount of time as during the first cycle. Of course, the real test is 6–12 months in, but based on early use, they’re not collapsing immediately, which is already better than some no‑name batteries I’ve tried for other gear.

If you’re ultra‑cautious and want something guaranteed to behave the same for years, the official Ring batteries are still the safer bet. But for the price of this kit, the durability so far is acceptable. Nothing feels like it’s about to fall apart, and functionally, both batteries and charger are holding up under regular use. I’d call the durability “good enough for normal home use”, not bulletproof, but also not flimsy junk.

In practice, performance is decent and close enough to the original Ring batteries that I didn’t have to change how I use my cameras. On my Doorbell 3, with motion alerts on and a fair amount of daily activity (busy street, a few deliveries, and me checking the live view here and there), my original Ring battery usually lasts about 3–4 weeks. With the JYJZPB battery in the same doorbell, using the same settings, I’m getting roughly in that same range, maybe a bit more, but not by a huge margin. So the 7200mAh claim doesn’t double anything, but it doesn’t feel worse either.

On the Stick Up Cam 3rd gen, which is used mostly for the backyard and gets fewer motions, I normally get about 5–6 weeks with the original battery. The JYJZPB battery also held up well there. After about three weeks, I was still above 60%, which lines up with the idea that I’ll probably get similar or slightly better runtime than the Ring pack. It’s not a scientific lab test, but in normal usage, I never felt like these drained faster than expected. No sudden drops from 30% to 5% either, which is something I’ve seen with really cheap knockoff batteries in other devices.

Another point: the Ring app treats them normally. Battery level displays correctly, and I never saw any warnings saying the battery wasn’t supported or anything like that. Live view loads as usual, motion clips save, and I didn’t have any random camera reboots or disconnects that I could link to these batteries. If I hadn’t known they were third‑party, I probably wouldn’t have noticed anything different in daily use. That’s basically what I was hoping for.

So in terms of performance, I’d call these batteries “good enough and slightly better than stock” rather than anything mind‑blowing. They’re not turning your Ring into a solar‑powered unicorn, but they do keep your cameras running reliably without obvious downsides. If you’re expecting double the runtime versus Ring’s own batteries just from the 7200mAh spec, you’ll be disappointed. If you just want something that works like the original and maybe gives you a bit more breathing room, they do that.

When you open the box, you get two batteries, one dual charging station, and a USB cable. That’s it, no wall plug, so you’ll need to use a USB charger from your phone or something similar. The station has two slots for the batteries and a micro‑USB input on the back. It’s very straightforward: plug in the cable, drop in the batteries, and the indicator lights show charging status. There’s no manual full of fancy features, just a small leaflet explaining the basics.

The batteries are shaped exactly like Ring’s quick‑release batteries, with the same sliding latch and contact layout. I dropped one into my Doorbell 3 and it clicked in with no force or fiddling. Same for the Stick Up Cam. So from a compatibility standpoint, they’re clearly built to copy Ring’s design closely, and that’s a good thing here. They also claim compatibility with Ring Doorbell 2/3/3+/4, Stick Up Cam 2nd/3rd gen, Spotlight Cam, and some of the smart lighting devices. I can’t test all of those, but at least on my two devices, they slot in perfectly.

The charger is basic but practical. Two bays, two LEDs, no extra buttons. Red while charging, green when done. It’s not fast charging or anything fancy, but for overnight charging it does the job. Compared to Ring’s own single‑slot charger, having two bays is just more convenient when you’re running multiple devices. You can keep one battery always charging and still have a spare ready.

So in terms of what you actually get, it’s a simple, functional kit: two third‑party Ring‑style batteries and a no‑nonsense dual charger. No extra accessories, no storage case, nothing surprising. For the price bracket it sits in, that feels fair. Just don’t expect premium finishes or a fancy dock; it’s clearly designed to be practical and cheap to manufacture rather than nice to look at on a shelf.